In Stock — Ships Same Day
Free Cut Premium Pro COB LED Strip – 14W/m, 24V, 8mm PCB, IP20
| Colour Temperature | , , Warm White 3000k |
|---|---|
| ip-rating |
IP20 |
| led-p-m |
528ledp/m |
| roll-size |
5 meters |
| voltage |
24V |
| pcb-width |
8mm |
| wattage |
14W |
Our Free Cut Premium Pro COB LED Strip takes the same cut-anywhere flexibility as our standard Free Cut range and pairs it with serious output — a 14W per metre power draw and a dense 528 LEDs per metre configuration, for a strip that's both perfectly cuttable and genuinely bright.
Why Choose our Free Cut Premium Pro COB LED Strip?
Chip on Board (COB) technology delivers a completely seamless, dot-free line of light — brighter than standard strips, making this Free Cut Premium Pro COB LED Strip a strong fit for primary room lighting, high-end commercial displays, and anywhere powerful, continuous illumination matters as much as the perfect cut.
Specification
See the table for exact figures — here's what they mean for your project. At 14W per metre, this Free Cut Premium Pro COB LED Strip is a genuinely high-output choice, better suited to primary lighting than a subtle accent. The dense 528 LEDs per metre configuration is what delivers the dot-free, seamless glow — significantly denser than standard strips. As with our full Free Cut range, it's cut-anywhere along its length, not limited to fixed marked points. Compatible with opal diffuser LED profiles, which soften and evenly spread the light, with a small, expected reduction in output as a result.
Free Cut Premium Pro Colour Temperatures
Every Free Cut Premium Pro COB LED Strip is available in three precisely binned Kelvin temperatures, so you can specify the exact white light your project needs:
- 3000K (Warm White) — a signature warm glow suited to luxury residential projects and high-end hospitality finishing.
- 4000K (Natural White) — the professional neutral standard, where colour integrity and task performance matter most.
- 6000K (Cool White) — a pristine, high-definition white for specialist display, art accents, and detailed task areas.
Pair with a Compatible LED Profile
This Free Cut Premium Pro COB LED Strip's 8mm PCB fits a range of our LED profiles. Browse our LED Profiles — or if you're not sure which type suits your project, check out our guide to choosing the right LED profile.
Match with a 24V LED Driver
- Looking for a compatible 24V LED Driver? We have a range of Dimmable/Non-Dimmable and IP20 or IP67 rated drivers — browse LED Drivers.
- Not sure what size or type of driver you need? See how to calculate the right driver size for your total run length.
How to Control Your Free Cut Premium Pro COB LED Strip
Free Cut Premium Pro LED strips can be switched using an LED-compatible wall switch rated for the driver's load. For additional control — dimming or scheduling — pair with one of our controllers: choose our WiFi LED Controller for direct phone control, or our Zigbee LED Controller for a mesh-based smart home system compatible with Google Assistant and Alexa. We also offer a range of wireless wall controls and remotes — contact us to find out more.
Joining and Extending Runs
Need to join two lengths or turn a corner? Our solderless COB connectors are available in a range of styles — including strip-to-strip, strip-to-wire and 90-degree corner connectors — browse our connector range for a clean join with no soldering required.
Complete your setup
- Not sure which colour temperature suits your project? Read our guide to choosing the right colour temperature
- Need something bespoke? Contact us for a project-specific quote
Frequently asked questions
Can this strip be dimmed?
Yes, when paired with a compatible dimmable driver and either a wall dimmer switch rated for LED loads or one of our controllers.
Can I really cut this anywhere, not just at marked points?
Yes — cut-anywhere flexibility applies across our whole Free Cut range, Premium Pro included.
What's the difference between this and your standard Free Cut range?
Both share the same 528 LEDs per metre density and cut-anywhere flexibility — this range runs at 14W per metre for higher output, suited to primary lighting, versus 9W per metre on our standard Free Cut.
What's the difference between this and your High Power range?
Both share the same 528 LEDs per metre density and 14W per metre output — the difference is cutting flexibility. High Power has fixed cut points; Premium Pro can be trimmed at any point along its length.
Do I need to worry about voltage drop on long runs?
As a general guide, we recommend a maximum single run of 10m before voltage drop becomes noticeable — beyond this, the far end of the run can appear dimmer than the end nearest the driver. For runs longer than 10m, power the strip from both ends or use a mid-point power injection connection. Get in touch and we'll help make sure your specific setup is powered correctly.
Key Features & Technical Benefits
Suggested Applications:
Installation & Notes
❗ Crucial Installation & Warranty Notes (Must Read)
Due to the high power (14W/m) and density of this strip, proper installation and component selection are absolutely essential to validate the 5-Year Ultimate LED’s Warranty. Failure to adhere to these specifications will void the warranty:
- LED Driver (Power Supply): An appropriate higher-capacity 24V DC LED driver is mandatory. The driver must be a quality, regulated power supply certified for LED use. Your warranty is contingent on the driver providing stable, consistent 24V DC output and the driver’s wattage correctly matching or exceeding the total strip load.
- Aluminum LED Profile (Heatsink): Installation in a suitable aluminum profile is mandatory. The profile must provide robust heat dissipation to protect the COB chips from thermal damage. Damage resulting from thermal runaway due to non-use or inadequate heatsinking will not be covered.
Note on Cutting and Connection: Once the strip is cut, it will require a connection to power. This must be done using a secure connection method. See our Accessories section for our full range of connectors.
Compatibility & Recommended Accessories
To complete your high-power, precision installation, we recommend the following compatible products:
- 24V LED Drivers: Filter for high-wattage/high-capacity drivers)
- Aluminium LED Profiles:
- Solderless Connectors (8mm): (Link to specific 8mm connectors in Accessories—essential for making new connections after cutting)
Single Colour Controllers/Dimmers:
Certifications
Reviews
There are no reviews yet.